Node Status Display¶
Once you have completed the initial setup on your AREDN™ node, you can connect your computer to the LAN port on the PoE and navigate to the following URL:
http://localnode:8080. You will be redirected to the Node Status page as shown below.
Below the node name bar there are several controls.
- Opens a new window or tab to display the node help page.
- Updates the Node Status page with current data.
- Mesh Status
- Opens the Mesh Status page showing the neighbor nodes and remote nodes visible on the mesh network, as well as what services are being provided by those nodes.
- WiFi Scan
- Displays a list of other 802.11 signals that your node can see. The 802.11 signals may include Access Points, neighbor nodes, and other mesh networks (foreign ad-hoc networks), but only if they are using the same bandwidth settings as your node. When multiple ad-hoc networks are visible (with different SSIDs or channels), the network is displayed but not the individual nodes. There is also an automatic scan mode, but running a wifi scan continuously is not recommended because this will degrade mesh performance. A wifi scan transmits queries on all channels to discover other devices.
- Navigates to the Setup pages for your node. You will need to supply a username and password to access those pages. The username is always
root, while the password is the one you set during initial node setup. If the node has not yet been configured, the password is
- Select Theme
- AREDN™ firmware has several built-in display themes. The default
aredntheme has a gray background with black and red text. The
black_on_whitetheme is often chosen because it provides the best screen contrast on a computer exposed to direct sunlight.
red_on_blackis much better suited for nighttime use since it helps preserve night vision.
Node Settings Summary¶
The area under the display controls shows both configuration and network status information. The left column contains the IP address details for the network interfaces on this node, as well as the SSID, channel, and bandwidth settings.
The right column contains the Signal Strength readings and other attributes of your node. The Signal/Noise/Ratio shows the strongest neighbor radio signal strength in dBm from all connected stations, and it is available only when the node is connected by RF to a mesh network. Click these links for further information about Signal to Noise Ratio and values measured in decibels.
Below the Signal Strength readings are the node’s Firmware Version and network type. The System Time is displayed, as well as the Uptime, or time since the last reboot. Nodes have no internal battery or realtime clock, so the time is reset every time the node is booted. If an Internet connection becomes available, the internal NTP client will connect with a time server to sync the node’s time.
The Load Average is the average number of processes that have been running on the node for the last 1, 5, and 15 minutes. Free Space tells you how much space is available on local storage devices. Flash is the internal non-volatile storage where the operating system, configuration files, and software packages are kept. /tmp is a filesystem in memory that stores the node’s current status and various temporary files. Memory is the amount of RAM available for running processes on the node.
The OLSR Entries show the total number of entries in the routing table, as well as the number of nodes currently connected to the mesh network.
There is a Charts button next to the node’s Signal Stength display, and clicking this button takes you to Signal Charts. This page shows RF signal information in both a realtime and an archived view. The default view shows the average signal of all connected stations in realtime.
At the top of the charts display there are several control buttons.
- This button shows the charts for any archived signal data on this node.
- This button shows the charts for current signal data as seen from this node.
- This button exits the charts view and takes you back to the Node Status page.
Below these controls you can choose to view the signal strength statistics for individual nodes that are directly connected to your node. Choose the neighbor node from the Selected Device dropdown list. Changing the selected device will automatically reload the chart to show that node’s information.
Hovering over data points within a chart will show additional information for each data point, including Time, Signal, Noise, SNR, TX Rate, TX MCS, RX Rate, and RX MCS. If no traffic is being routed to the neighbor, the Rate and MCS values may be zero until data is available. An MCS value of zero may indicate non-802.11n encoding schemes (ie. 802.11a/b/g).
The small icon with three vertical dots in the upper right corner of the chart allows you to download a snapshot of the chart to a graphic file on your local computer (jpeg or png).
Data shown in the Archive charts is not stored in permanent memory on the node. The node will store approximately two days of archived data, and all data is cleared when a node is rebooted.
If you click and drag your mouse across a region of the chart, the display will zoom into that selected area. This allows you to view data points for a specific time range of your choice. While zoomed, two additional icons will appear in the upper right of the chart. The Pan icon allows you to scroll and pan the zoomed portion of the chart. The Reset icon returns the chart to its normal display mode.